Related Experiment Video
Updated: May 30, 2025

Biomass Conversion to Produce Hydrocarbon Liquid Fuel Via Hot-vapor Filtered Fast Pyrolysis and Catalytic Hydrotreating
Published on: December 25, 2016
Transitional analysis for multi-objective operative improvement of reformate quality and hydrogen production from a
F Velázquez-Alonso1,2, C A González-Ramírez1, J R Villagómez-Ibarra1
1Área Académica de Química, Instituto de Ciencias Básicas e Ingeniería, Universidad Autónoma del Estado de Hidalgo. Ciudad del Conocimiento, Carretera Pachuca-Tulancingo Km. 4.5, C.P. 42184, Mineral de la Reforma, Hidalgo, Mexico.
Abstract:
The hydrogen produced (H ) in the Catalytic Naphtha Reforming (CNR) is important in quantity and quality, for the feedback of the process and for supplying the hydrotreatment processes in current refineries. In this work it is presented a study by process simulation using Aspen HYSYS® for finding operative transitional modes that simultaneously improve quality of the reformate and hydrogen production of the CNR. The operative conditions that were studied correspond to the recirculation ratio of hydrogen/hydrocarbon (H /HC), with values between 2 and 6, and the temperature (T), between 450 and 525 °C, in order to determining the best operative transitional route from the initial operative state to a local improved state, applying the method of superposition of response surfaces and criteria assessment of improvement in quality and quantity of hydrogen produced. A numerical multi-objective operative improvement analysis was performed resulting the objective variables as: Research Octane Number (RON) = 90.72, mass fraction of H produced (%m of H ) = 2.9, quality of recycled H (yH ) = 0.87, and quality of produced hydrogen (yH ) = 0.9653. Experimental pilot plant data and full-scale industrial data were compared with simulations observing significant similitudes.
More Related Videos
Related Concept Videos
Reduction of Alkenes: Catalytic Hydrogenation
Metals like palladium, platinum, and nickel are commonly used in their solid forms — fine powder on an inert surface. As these catalysts remain insoluble in the reaction mixture, they are referred to as heterogeneous catalysts.
The hydrogenation process takes place on the...
Reduction of Alkynes to cis-Alkenes: Catalytic Hydrogenation
Like alkenes, alkynes can be reduced to alkanes in the presence of transition metal catalysts such as Pt, Pd, or Ni. The reaction involves two sequential syn additions of hydrogen via a cis-alkene intermediate.
Reduction of Benzene to Cyclohexane: Catalytic Hydrogenation
Reduction of Alkenes: Asymmetric Catalytic Hydrogenation
The metal catalyst used can be either heterogeneous or homogeneous. When hydrogenation of an alkene generates a chiral center, a pair of enantiomeric products is expected to form. However, an enantiomeric excess of one of the products can be facilitated using an enantioselective reaction or an...
Catalysis
Alcohols from Carbonyl Compounds: Reduction
Catalytic hydrogenation is similar to the reduction of an alkene or alkyne by adding H2 across the pi bond in the presence of transition metal catalysts like Raney Ni, Pd–C, Pt, or Ru. Aldehydes and ketones can be reduced by this method, often under mild to moderate heat (25–100°C) and...

