Related Experiment Video
Updated: May 30, 2025

The Modular Design and Production of an Intelligent Robot Based on a Closed-Loop Control Strategy
Published on: October 14, 2017
State switch control of magnetically suspended flywheel energy storage system in uninterrupted power supply system
Lingbo Zheng1, Yili Zheng1, Biao Xiang2
1School of Technology, Beijing Forestry University, Beijing, 100083, China.
Abstract:
The magnetically suspended flywheel energy storage system (MS-FESS) is an energy storage equipment that accomplishes the bidirectional transfer between electric energy and kinetic energy, and it is widely used as the power conversion unit in the uninterrupted power supply (UPS) system. First, the structure of the FESS-UPS system is introduced, and the working principles at different working states are described. Furthermore, the control strategy of the FESS-UPS is developed, and the switch oscillation of the FESS-UPS system between the charging and discharging states is analyzed. Then, the switch strategy using the angle compensation of the flux linkage is designed to control the FESS-UPS system among different working states, and the peak values of current and voltage at the switch moment are suppressed. Finally, the simulations and experiments are performed to validate the performances of the switch strategy used in the FESS-UPS system, and the results prove that the current/voltage peaks during the switching process are effectively mitigated, so the impact on the power converter caused by the state switch is suppressed. Therefore, the control performance of the UPS using the MS-FESS could be further improved, and the FESS-UPS could realize the fast and safe discharge/charge for the grid source and three-phase loads.
More Related Videos
06:45Design and Application of a Fault Detection Method Based on Adaptive Filters and Rotational Speed Estimation for an Electro-Hydrostatic Actuator
Published on: October 28, 2022
11:44Real-Time DC-dynamic Biasing Method for Switching Time Improvement in Severely Underdamped Fringing-field Electrostatic MEMS Actuators
Published on: August 15, 2014
Related Concept Videos
Control of Power Flow
Generator Voltage Control
Turbine-Governor Control
Load-frequency control
Multimachine Stability
In analyzing the system, the nodal equations represent the relationship between bus voltages, machine voltages, and machine currents. The nodal equation is given by:
Magnetic Damping
If, however, the bob is a slotted metal plate, the magnet produces a much smaller effect. When a slotted metal plate enters the field, an emf is induced by the change in flux; however, it is less effective because the slots limit the...