Enhancing Zn Deposition Reversibility on MXene Current Collectors by Forming ZnF₂-Containing Solid-Electrolyte...

Anode-free aqueous zinc metal batteries (AZMBs) offer significant potential for energy storage due to their low cost and environmental benefits. Ti₃C₂T_x MXene provides several advantages over traditional metallic current collectors like Cu and Ti, including better Zn plating affinity, lightweight, and flexibility. However, self-freestanding MXene current collectors in AZMBs remain underexplored, likely due to challenges with Zn deposition reversibility. This study investigates the combination of a Ti₃C₂T_x self-freestanding film with advanced electrolyte engineering, specifically examining the effects of Li-salt and propylene carbonate (PC) as additives on Zn plating reversibility. While using Li⁺ ions as an additive alone facilitates uniform Zn deposition on bulk metals through the electrostatic shielding effect, the addition of Li-salt negatively impacts Zn plating uniformity on Ti₃C₂T_x. Meanwhile, using PC additive alone forms an organic SEI layer on Ti₃C₂T_x and causes Zn agglomeration. The use of both additives together results in a ZnF₂-containing hybrid SEI layer with improved interfacial kinetics, promoting more uniform Zn deposition. This approach achieves an average Coulombic efficiency (CE) of 96.8% over 150 cycles (a maximum CE of 97.8%). The study highlights the strategic difference in electrolyte design, emphasizing the need for tailored approaches to optimize Zn deposition on MXenes, contrasting with traditional metallic current collectors.