Related Experiment Video
Updated: May 30, 2025

Reducing Willow Wood Fuel Emission by Low Temperature Microwave Assisted Hydrothermal Carbonization
Published on: May 19, 2019
Water impact analysis due to coal-electricity generation using the life cycle assessment method: a case study in
Nurul Hani Mardi1, Lee Woen Ean2, Marlinda Abdul Malek3
1Institute of Energy Infrastructure (IEI), Universiti Tenaga Nasional, Kajang, Selangor 43000, Malaysia
Abstract:
Coal power plants adversely impact air pollution, but they also pose a risk to our water sources. Discharge wastewater from power plants may degrade the quality of nearby water bodies. This study evaluates the potential water-related environmental impacts of electricity generation at an ultra-supercritical coal power plant in Malaysia using the life cycle assessment method. The inventory data were gathered from a Malaysian power plant, and supporting data were taken from the relevant literature. Utilizing the ReCiPe 2016 impact assessment method, this study analyses the mid-point impact categories of freshwater eutrophication (FEP), marine eutrophication (MEP), freshwater ecotoxicity (FETP), and marine ecotoxicity (METP). The results indicate that METP is the leading risk, with an average impact of 1.94 × 10-2 kg 1,4-DCB per kWh electricity generated, followed by FETP (1.40 × 10-2 kg 1,4-DCB), FEP (4.66 × 10-4 kg P eq), and MEP (2.95 × 10-5 kg N eq). About 95% of the mid-point impact is due to the extraction and processing of hard coal. These findings underscore a critical aspect of environmental management at the supply chain level. Furthermore, mitigating direct emissions from power generation could reduce the mid-point impact, as demonstrated by comparisons with previous research.
Related Concept Videos
Electrical Energy
Design Example: Analyzing Capacity Contours for Flood Risk Assessment
Electric Generator: Alternator
The magnetic flux passing through the coil varies sinusoidally as the loop rotates inside the magnetic field. This...
Wind Turbine Machine Models
Induction machines interact through the rotating magnetic field generated by the stator and the rotor. The key parameter is slip, which is the difference between synchronous speed and rotor speed relative to synchronous speed. Slip is...
Control of Power Flow
Generation of Three-Phase Voltage
As the rotor...

