Power beacon-assisted energy harvesting symbiotic radio networks: Outage performance

The evolution of next-generation Internet-of-Things (IoT) in recent years exhibits a unique segment that wireless communication paradigms are oriented towards not only improved spectral efficiency transmission but also energy efficiency. This paper addresses these critical issues by proposing a novel communication model, namely power beacon-assisted energy-harvesting symbiotic radio. In particular, the limited energy primary IoT source communicates with its destination by first harvesting energy from a dedicated power beacon and then performing information exchange, while the backscatter device communicates by exploiting the available radio frequency emitted by the primary IoT source. The destination uses successive interference cancellation mechanisms to decode both its received signals. To assess the performance quality of the proposed communication model, we theoretically derive the coexistence outage probability (COP) in terms of highly accurate expressions and upper-bound and lower-bound approximations. Subsequently, we carry out a series of numerical results to verify the developed theory frameworks on the one hand, and on the other hand, analyze the COP performance against the variations of system key parameters (transmit signal-to-noise ratio, the time-splitting coefficient, the energy conversion efficiency factor, the reflection coefficient, and the coexistent decoding threshold). Our numerical results demonstrate that the proposed communication model can potentially work well in practices with reliable communication over 90% (COP is less than 0.1). Additionally, it also demonstrates that optimizing the reflection coefficient at the backscatter device can facilitate achieving minimal COP performance.