Related Experiment Video
Updated: May 29, 2025

Microparticle Manipulation by Standing Surface Acoustic Waves with Dual-frequency Excitations
Published on: August 21, 2018
A nonlinear sound field control method for a multi-channel parametric array loudspeaker array
Yunxi Zhu1,2, Liwen Qin1,2, Wenyao Ma1,2
1Key Laboratory of Noise and Vibration Research, Institute of Acoustics, Chinese Academy of Sciences Beijing, 100190, People's Republic of China.
Abstract:
A parametric array loudspeaker (PAL) generates a highly directional audible sound beam. However, indoor scattering and reflecting effects diminish its advantage of high directivity, causing the scattered or reflected sound to appear in undesired regions. Deriving from the Westervelt equation, the nonlinear coupling exists between each channel, rendering linear sound field control algorithms ineffective. This paper proposes a framework of nonlinear sound field control, enabling the manipulation of nonlinear sound fields generated by the PAL in complicated acoustic environments. Besides, PAL often faces challenges in radiation efficiency due to the poor conversion efficiency of nonlinear sound. Therefore, a sound control algorithm suitable for PAL is proposed, which maximizes radiation efficiency while ensuring acoustic contrast through a two-stage non-convex optimization procedure. The simulations and experimental results verify the effectiveness of the proposed framework and algorithm of nonlinear sound field control. The undesired audible sound in the dark zone is suppressed while maintaining the desired audible sound in the bright zone. This enhances the performance of a PAL in real scenarios with existing scattering or reflecting effects.
Related Concept Videos
Perceiving Loudness, Pitch, and Location
Place theory, or place coding, suggests that different pitches are heard because various sound waves activate specific locations along the cochlea's basilar membrane. The brain determines the pitch of a sound by...
Frequency-Domain Interpretation of PD Control
The proportional control gain, combined with the...
Wave Parameters
Design Example
Interference: Path Lengths
Two special sources may be considered when they are in phase. This can be easily achieved by feeding the two sources from the same source. An example would be synchronizing the two speakers by feeding them with the same source, such as the sound waves produced by a tuning fork. This setup ensures that the two sources have the same frequency and are...
Bandpass Sampling
A bandpass signal has a spectrum with a lower frequency limit, denoted as ω1, and an upper frequency limit, denoted as ω2....

