Assessing the Effectiveness of Dowel Bars in Jointed Plain Concrete Pavements Using Finite Element Modelling

Aggregate interlocking and dowel bar systems are the two primary mechanisms in a jointed plain concrete pavement for transferring the wheel loads from the loaded slab to the adjacent unloaded slab, avoiding critical stresses and excessive deformations across the joint. Aggregate interlocking is suitable for small joint openings, while the dowel bar provides effective load transmission for both smaller and wider joint openings. In this study, a three-dimensional finite element model was developed to investigate the structural performance of dowelled jointed plain concrete pavements. The developed model was compared with an analytical solution, i.e., Westergaard's method. The current study investigated the effectiveness of the dowel bars in jointed plain concrete pavements considering the modulus of elasticity and the thickness of the base layer, as well as dowel bar diameter and length. Furthermore, the load transfer efficiency (LTE) of a rounded dowel bar was compared with that of plate dowel bars (i.e., rectangular and diamond-shaped dowel bars) of a similar cross-sectional area and length. This study showed that the LTE was enhanced by 4% when the base layer's modulus of elasticity increased from 450 MPa to 6000 MPa, while the increase in stress was 23%. A 1.2% improvement in the LTE and a 2.1% reduction in flexural stress were observed as the base layer's thickness increased from 100 to 250 mm. Moreover, increasing the dowel bar's diameter from 20 mm to 38 mm enhanced the LTE by 4.3% and 3.8% for base layer moduli of 450 MPa and 4000 MPa, respectively. The corresponding rise in stresses was 10% and 5%. The diamond-shaped dowel bar of a 50 × 32 mm size showed a 0.48% increase in the LTE, while sizes of 100 × 16 mm and 200 × 8 mm reduced the stress 6.7% and 23.1%, respectively, compared to that in the rounded dowel bar. With rectangular dowel bars, a 4% rise in the stress was noted compared to that with the rounded dowel bar. Increasing the length of the diamond-shaped dowel bar slightly improved the LTE but had no impact on the stress in the concrete slab. The findings from this study can help highway engineers improve pavements' durability, make cost-effective decisions, contribute to resource savings in large-scale concrete pavement projects, and enhance the overall quality of infrastructure.