Related Experiment Video
Updated: May 28, 2025

Preparation of Aligned Steel Fiber Reinforced Cementitious Composite and Its Flexural Behavior
Published on: June 27, 2018
Study on the Axial Compressive Behavior of Steel Fiber Reinforced Concrete Confined with High-Strength Rectangular
Huajing Zhao1, Weitong Liu1, Penghui Yang2
1School of Science, Xi'an University of Architecture and Technology, Xi'an 710055, China.
Abstract:
Monotonic axial compression tests were carried out on 16 steel fiber-reinforced concrete (SFRC) columns confined by rectangular spiral stirrups. The impacts of stirrup spacing, stirrup strength, concrete strength, and cross-sectional aspect ratio on the peak load, ductility, and failure mode of these columns were analyzed. The test results demonstrate that steel fibers significantly mitigate the spalling of the concrete column's protective layer through their bridging effect. Small spacing and high-strength spiral stirrups effectively confine the core concrete, enhancing the bearing capacity and ductility of concrete columns. Concrete strength exhibits a positive correlation with the confinement effect. However, as concrete strength increases, the rate of improvement in the confinement effect decreases. At peak compressive stress, the high-strength stirrup may not reach its yield state. Based on the test results, a method for calculating stirrup stress under the peak stress of confined concrete is proposed. A "coupling restraint coefficient" is proposed, and a constitutive model for HRSS confined steel fiber reinforced concrete is developed, considering the coupled effect of effective confinement forces in different directions. Comparative analysis shows that the constitutive model established in this paper agrees well with the experimental results and demonstrates good applicability.
More Related Videos
Related Concept Videos
Reinforcements in Concrete
Fiber Reinforced Concrete
Tensile Strength Considerations of Concrete
The dimensions and shape of a concrete specimen...
Behavior of Concrete Under Compressive Load
As the concrete specimen fractures under...
Relation Between Tensile Strength and Compressive Strength of Concrete
Design Example: Distributing Reinforcements in Concrete Sections

