One-Point Calibration of Low-Cost Sensors for Particulate Air Matter (PM) Concentration Measurement

The use of low-cost sensors has dramatically increased in recent years in all engineering sectors. In the buildings and automotive field, low-cost sensors open very interesting perspectives, because they allow one to monitor temperature and humidity distributions together with air quality in a widespread and punctual way and allow for the control of all energy parameters. The main issue remains the validation of the measurements. In this work, we propose an innovative approach to verify the measurements given by some low-cost systems built ad hoc for automotive applications. Two independent low-cost measurement systems were set to measure Particulate Air Matter (PM) concentration, TVOC concentration, CO₂ concentration, formaldehyde concentration, air temperature, relative humidity, pressure, air flow velocity, and GPS position. These systems were calibrated for PM concentration measurement by comparison with standard and certified sensors used by the regional authority of the Emilia-Romagna region (ARPAE, Italy) for characterizing air quality. The duration of the analysis, three days, is not representative of the diverse environmental conditions that occur across different seasons. However, the innovation of this approach lies in both the in-field comparison of low-cost and high-quality sensors and the use of proper conversion approaches for mass concentration measurements. A quantitative analysis of the sensors' performance is given, with a focus on the effects of time granularity, relative humidity, mass conversion from particle counts, and size detection response. The results show that the low-cost sensors' measurements of air temperature, relative humidity, and particle number concentration are in good agreement with high-quality sensors' measurements, with a strong impact of relative humidity on performance indicators. Overall, good quality and consistency of the data among the sensors were achieved.