Warm irrigation fluid effect on Thulium fiber laser (TFL) ablation of uroliths

Prior laser studies have demonstrated that as the temperature of a medium increases, the amount of energy delivered to the target increases. We sought to investigate the role of irrigation fluid temperature on Thulium fiber laser (TFL) urolith ablation. 360 calculi were divided in vitro according to chemical composition: calcium oxalate monohydrate (COM), cystine (CYS), struvite (STR), calcium phosphate (CAP), uric acid (UA), and calcium oxalate dihydrate (COD). A 200 μm TFL was placed directly on each stone, while immersed in 0.9% NaCl at four different temperatures (25 C, 37 C, 44 C, 60 C) and a single laser pulse administered at distinct energy settings (0.1 J, 0.5 J, 1.5 J). Optical coherence tomography assessed the resulting ablation cone volume. Mean stone volume and porosity were evaluated through ANOVA and Tukey post-hoc analysis. A multivariate generalized model for each composition accounted for the impact of fluid temperature and laser energy on stone ablation. Warmer fluid temperatures yielded greater ablation cone volumes for most energy settings, excluding UA stones. When accounting for chemical composition, higher tensile strength stones (COM, CYS) benefited most from warmer fluid in comparison to frangible stones (CAP, STR). The effects of increasing fluid temperature are modest relative to laser pulse energy as a large temperature increase (i.e. 7ºC) is equivalent to a minor energy increase (i.e. 0.1 J). For non-UA stones, TFL ablation efficiency increases with warmer irrigation fluid. The effect, albeit modest compared to laser pulse energy, was most notable for COM and CYS stones.