Related Experiment Video
Updated: May 24, 2025

Removal of Arsenic Using a Cationic Polymer Gel Impregnated with Iron Hydroxide
Published on: June 28, 2019
Quaternized cross-linked peach gum polysaccharide as an adsorbent for fast and selective removal of anionic dyes from
Haicun Yang1, Mingyue Shi1, Wenzhong Ma2
1Jiangsu Key Laboratory of Environmentally Friendly Polymeric Materials, School of Materials Science and Engineering, Changzhou University, Changzhou, Jiangsu 213164, PR China.
Abstract:
To overcome low adsorption capacity, slow adsorption rate, poor adsorption selectivity, and dissolution of peach gum polysaccharide (PGP), an amino-rich crosslinked PGP (ACPGP) was first synthesized by cross-linking highly soluble PGP. Subsequently, a cation-rich PGP (QCPGP) was prepared from ACPGP through the addition of glycidyltrimethyl ammonium chloride (GTAC) and a secondary quaternization. The step-by-step preparation process was confirmed, and the adsorption properties of PGP, ACPGP, and QCPGP were compared in detail. The adsorption of crude PGP for cationic dyes violet (MV, 135.0 mg/g) and methylene blue (MB, 121.4 mg/g) were spontaneous endothermic, following the pseudo-first-order kinetic model and D-R isotherm. Due to the presence of rich charged groups in their structure, their highly selective adsorption towards new coccine (NC) and tartrazine (TTZ) is spontaneous and endothermic, and can be described by the pseudo-first-order and pseudo-second-order kinetic models, respectively. According to the Langmuir isotherm, the Qm of ACPGP and QCPGP for NC and TTZ was calculated to be 876.2 and 1304.3 mg/g (NC), and 814.5 and 1136.7 mg/g (TTZ), respectively. QCPGP exhibited more advantages in terms of adsorption capacity, adsorption rate (equilibrium time of 10 min), environmental stability, adsorption selectivity, and regeneration efficiency, showing great potential in practical wastewater treatment applications.
Related Concept Videos
Ion Exchange
Masking and Demasking Agents
There are many masking agents, such as cyanide, fluoride, triethanolamine, thiourea, and 2,3-bis(sulfanyl)propan-1-ol (formerly 2,3-dimercapto-1-propanol), with the masking agent chosen based on...

