Related Experiment Video
Updated: May 24, 2025

Developing High Performance GaP/Si Heterojunction Solar Cells
Published on: November 16, 2018
13.7 % Efficient Graphene/Si Heterojunction Solar Cells with One-Step Transferred Polymer Anti-Reflection Layer for
Peng Xiao1,2, Ke Ding2, Jinggang Yang1
1State Grid Jiangsu Electric Power Co., Ltd. Research Institute, Nanjing, 211103, Jiangsu, P. R. China.
None:
Graphene/Silicon (Gr/Si) heterojunction shows great potential as high-efficiency, cost-effective solar cells compared to traditional Si solar cells. However, the high optical loss of c-Si, mainly originating from abrupt change of refractive index at air/Si interface, and the unsatisfactory conductivity of practically prepared graphene layer, still hinder their extensive applications. Herein, we report the performance improved Gr/Si solar cells by depositing a polymathic methacrylate (PMMA) anti-reflection coating (ARC) layer through a one-step transferred method. The graphene and PMMA ARC with specific thickness were transferred on n-type Si wafer at the same time, which reduces production steps and obtains high-quality graphene layer. By tuning the thickness of the PMMA layer, the reflection can be reduced obviously. Companying with the HNO3 vapor doping for graphene, the Gr/Si heterojunction solar cell with a high power conversion efficiency (PCE) of 13.7 % was achieved. In addition, the durability of the device is improved under HNO3 doping. Considering the easy and cost-effective solution processed capability of the one-step transferred graphene and PMMA ARC layer, we believed that PMMA/Gr/Si is a feasible low-temperature technique for high-efficiency Si solar cells.
More Related Videos
08:29Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer
Published on: January 10, 2017
07:32Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization
Published on: January 29, 2017