Related Experiment Video
Updated: May 23, 2025

A 3D-printed Chamber for Organic Optoelectronic Device Degradation Testing
Published on: August 10, 2018
Parameters critically affecting the open circuit voltage of an organic solar cell
Pelote Elvis Pepa1, David Afungchui1,2, Olivier Holtomo1,3
1Department of Physics, Faculty of Science, The University of Bamenda, P. O. Box 39, Bambili, Cameroon.
Abstract:
This paper investigates the influence of different parameters on the open circuit voltage of an organic solar cell (OSC) and how the open circuit voltage impacts the cell's power conversion efficiency. These parameters include temperature, light intensity, recombination, charge carrier density, charge carrier mobility ratio, and the reverse saturation current. Organic solar cells' power conversion efficiency is still far from ideal and is currently about 20 %. In the approach, mathematical expressions governing these parameters are established and simulations are then performed in which all other parameters are held at their optimal values and one parameter of interest is varied within a predetermined range. It is shown that the open circuit voltage (Voc) can theoretically reach a value of about 2.34 V if the following parameters are maintained optimal: light intensity, charge-carrier density (1 × 1018cm-3), charge carrier mobility ratio (10) and cell temperature (320 K). It is shown that the open circuit voltage (Voc) is negatively impacted by recombination (up to 30 Ω). Lastly, the power conversion efficiency is predicted to be 20 % at 0.63 V and can reach a theoretical value of 37 % at a Voc of 1.0 V, at a power intensity input of 6.578 w/m2, and a fill factor of 0.89 (max for silicon).
More Related Videos
06:49In situ Grazing Incidence Small Angle X-ray Scattering on Roll-To-Roll Coating of Organic Solar Cells with Laboratory X-ray Instrumentation
Published on: March 2, 2021
11:38Influence of Hybrid Perovskite Fabrication Methods on Film Formation, Electronic Structure, and Solar Cell Performance
Published on: February 27, 2017
Related Concept Videos
P-N junction
Multiple Voltage Sources
In series, the positive terminal of one battery is connected to the negative terminal of another battery. Hence, the voltage of each battery is added to give the net voltage, which is increased because each battery boosts the electrons that enter it. The same current flows through each battery because they are connected in series.
Batteries are...
Variables Affecting Phosphorescence and Fluorescence
Kirchhoff's Voltage Law
KVL states that the algebraic sum of all voltages around a closed path or loop within a circuit is zero. This means that the total voltage supplied in a loop is equal to the...
Electrolysis
Ohm's Law