Related Experiment Video
Updated: May 22, 2025

Calcium Carbonate Formation in the Presence of Biopolymeric Additives
Published on: May 14, 2019
High-Performance Oil Well Cement with Modified Calcium Carbonate Whiskers: Enhancing Durability Under HTHP Conditions
Xingguo Liu1, Jiankun Qin1,2, Rongdong Dai1
1Research Institute of Petroleum Engineering Technology, Shengli Oilfield, Dongying 257000, China.
Abstract:
This study investigates the effect of incorporating modified calcium carbonate whiskers, treated with tetraethyl orthosilicate (TEOS), to enhance the mechanical properties and sealing integrity of oil well cement under high-temperature and high-pressure (HTHP) conditions. Traditional cement systems are prone to brittleness and cracking under dynamic loads, leading to compromised wellbore sealing performance. Our findings demonstrate that fiber-toughened cement slurry improves the toughness and sealing performance of the cement annulus, maintaining gas tightness and mechanical integrity under cyclic alternating pressures at 150 °C. Specifically, the inclusion of 5% modified whisker fibers improves compressive strength by 24.5% and flexural strength by 43.3% while maintaining stable rheological and thickening properties. These results support the hypothesis that modified whisker fibers enhance the durability and sealing integrity of cement wellbores under extreme conditions, providing a practical solution for challenging cementing applications.
Related Concept Videos
Hydration of Cement
Strength and Heat of Hydration
The heat of hydration for each cement compound is significant; for instance, tricalcium aluminate (C3A) and...
Porosity in Cement Paste
The balance of water to cement in the mix is...
Types of Cement II
Sulfate Attack on Concrete
Sulfates from sources like soil, groundwater, or industrial effluents...
Types of Cement I
Type I (Ordinary Portland Cement) is widely used for general construction where special properties are not required. It has moderate sulfate resistance and heat of hydration.
Type II (Modified Cement) offers moderate resistance to sulfate attack and a lower rate of heat development compared to Type I. It is suitable for structures in...

