Activation of Polypropylene (PP) Fiber Surface with 1-Vinyl-1,2,4-triazole and Vinyl Acetate: Synthesis,...

Recently, the potential of recycled materials to improve the performance of concrete and other building materials has become an important research topic. It is known that various methods are applied to improve the tensile strength and energy absorption capacity of cementitious systems. One of the most common of these methods is the addition of fibers to the mixture. In this study, the effects of surface-modified polypropylene (PP) fibers obtained from recycled masks on the mechanical properties of mortar mixtures were investigated. In order to improve the matrix-fiber interface performance, 6 mm and 12 mm long recycled PP fibers were chemically coated within the scope of surface modification using 1-Vinyl-1,2,4-Triazole and Vinyl Acetate. With this modification made on the surface of PP fibers, we aimed to increase the surface roughness of the fibers and improve their adhesion to the matrix. Thus, we aimed to increase the mechanical properties of mortar mixtures as a result of the fibers performing more effectively in the concrete matrix. FTIR AND SEM-EDS analyses confirmed the success of the modification and the applicability of 1-Vinyl-1,2,4-Triazole and Vinyl Acetate to the fiber surface and showed that the fibers were successfully modified. It is seen that the fibers modified with Vinyl Acetate exhibit superior performance in terms of both the workability and strength performance of cementitious systems compared to the fibers modified with 1-Vinyl-1,2,4-Triazole. This study provides a significant contribution to sustainable construction materials by revealing the potential of using recycled materials in cementitious systems.