Related Experiment Video
Updated: May 22, 2025

Chemical Precipitation Method for the Synthesis of Nb2O5 Modified Bulk Nickel Catalysts with High Specific Surface Area
Published on: February 19, 2018
Compositional study of Ti-Nb oxide (TiNb2O7, Ti2Nb10O29, Ti2Nb14O39, and TiNb24O62) anodes for high power Li ion
Yeonguk Son1,2, Haeseong Jang3, Bo Wen1
1Department of Engineering, University of Cambridge 17 Charles Babbage Road CB3 0FS Cambridge UK mfld2@cam.ac.uk.
Abstract:
Titanium niobium oxides (TNOs) are attractive anode materials for high power density Li-ion batteries. However, the details of capacity storage in TNOs are not fully understood today as it depends on the Ti and Nb composition and their changes in the oxidation state. This is further complicated by a wide variation in gravimetric capacities reported in the literature for TNO anodes. Therefore, in this work, we systematically synthesise TiNb2O7, Ti2Nb10O29, Ti2Nb14O39, and TiNb24O62 particles using the same solid state reaction approach and report their electrochemical properties via galvanostatic cycling, cyclic voltammetry, and the galvanostatic intermittent titration technique (GITT). Furthermore, we use operando X-ray absorption spectroscopy (XAS) to investigate the redox reactions taking place in each of these compositions, which provides new insights into their charge storage mechanisms. We found that of the materials tested, TiNb2O7 anodes show the best cycling and rate performance, which could be related to the higher utilization of Nb redox revealed via operando XAS analysis.

