Related Experiment Video
Updated: May 21, 2025

Production and Analysis of Sporosarcina pasteurii Biocement Bricks Using Custom 3D-Printed Molds for Unconfined Compression Tests
Published on: March 7, 2025
Research on the strength prediction equation and model of cement stabilized macadam mixed with recycled construction
Jiangtao Fan1, Chen Zhang2, Yong Yi3
1School of Energy and Architecture, XiHang University, 259 West Second Ring Road, Xi'an, 710077, Shaanxi, China. 2020021070@chd.edu.cn.
Abstract:
While the issue of construction waste siege is becoming increasingly serious, the road construction industry is also facing the problem of sand and stone materials shortage, and adding construction waste to the road base can effectively help address both issues. In this work, the effects of 0-9.5 and 9.5-37.5 mm recycled construction waste aggregate (RCWA) content on the mechanical properties of cement-stabilized macadam (CSM) mixed with the RCWA were investigated, with the optimal RCWA content that allows for a strength not lower than that of ordinary CSM determined. Here, the mechanical strength growth law of CSM mixed with RCWA was studied, while a prediction equation and a model of the mechanical strength of the mix were proposed and the attendant reliability verified. The results indicated that the optimal ratio of CSM mixed with RCWA is as follows: 0-9.5 mm RCWA: 9.5-37.5 mm RCWA: 19.5-37.5 mm natural aggregate: 9.5-19.5 mm natural aggregate = 45:20:29:6. The correlation coefficient R2 of the established strength prediction equation was as high as 0.98, and when the cement content and RCWA content are known, the mechanical strength can be predicted. Meanwhile, the correlation coefficient R2 of the proposed strength prediction model was as high as 0.99, and when the 7-day mechanical strength of CSM mixed with RCWA is known, the model can be used to predict the mechanical strength at any curing age. This was verified using laboratory tests, and it was found that the deviation between the predicted values and the actual values was small.
Related Concept Videos
Aggregate Cement Ratio
Bonding and Strength of Aggregate
Strength of Cement
For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...
Abrasion Resistance of Concrete
One such test is the revolving disc test, where three plates...
Preplaced Aggregate Concrete
Deleterious Substances in Aggregate
Another type of impurity is clay and fine material that...

