Related Experiment Video
Updated: May 20, 2025

Procedure to Evaluate the Efficiency of Flocculants for the Removal of Dispersed Particles from Plant Extracts
Published on: April 9, 2016
Efficiency of an Ultrafiltration Process for the Depollution of Pretreated Olive Mill Wastewater
Mohammed Zine1, Noureddine Touach1, El Mostapha Lotfi1
1Laboratory of Spectroscopy, Molecular Modeling, Materials, Nanomaterials, Water and Environment, Environmental Materials Team, ENSAM, Mohammed V University in Rabat, Avenue des Forces Armées Royales, Rabat B.P. 6207, Morocco.
Abstract:
The depollution of constructed wetland-pretreated olive mill wastewater (OMW) using a membrane filtration system was experimentally studied. Dead-end filtration (DEF) was employed to evaluate suitable MF/UF membranes and select the appropriate molecular weight cut-off for optimal OMW treatment. Removal efficiencies for COD (chemical oxygen demand) and TOC (total organic carbon) using DEF reached maximum values of 88.14% and 11.17%, respectively. Adsorption of raw and pretreated OMW on granular activated carbon was also carried out for a comparative study against DEF and pretreatment. The semi-industrial-scale experiments were conducted using commercial ceramic ultrafiltration (UF) membranes (150 and 50 kDa) in cross-flow filtration (CFF) mode at a permeate flux around 200 L h-1 m-2 and a trans-membrane pressure (TMP) of 3.5-3.8 bars. This post-treatment had a significant impact on COD removal efficiency from pretreated OMW, reaching 78.5%. The coupled process proposed in this study achieved removal efficiencies of 97%, 97%, and 99.9% of COD, TOC, and turbidity, respectively.
More Related Videos
12:11A Modified EPA Method 1623 that Uses Tangential Flow Hollow-fiber Ultrafiltration and Heat Dissociation Steps to Detect Waterborne Cryptosporidium and Giardia spp.
Published on: July 9, 2012
09:22Ultrafast Lignin Extraction from Unusual Mediterranean Lignocellulosic Residues
Published on: March 9, 2021