Study on the Influence of Sn58Bi Alloy on Rock Perforation Plugging Performance

In order to solve certain issues, such as brittle fracture corrosion and easy failure, which occur under high ambient temperatures and high breakthrough pressures when conventional cement is used to plug rock perforations, a method using a Sn58Bi alloy was adopted in this paper; it was utilized to melt and plug a perforation. Subsequently, the influence of the characteristics of the rock perforation (such as perforation length and diameter) on alloy plugging performance under different conditions and ambient temperatures was studied. The experimental results show that the plugging effect of the Sn58Bi alloy was affected by ambient temperature, plugging diameter, and length. When the plugging length was 100 mm and the perforation diameter was 10 mm, the mechanical plug performance decreased by 24.0% when the ambient temperature increased from 30 °C to 60 °C, and then decreased by 19.0% when the ambient temperature increased to 90 °C. At 30 °C, the mechanical plug performance decreased by 30.4% when the diameter decreased from 10 mm to 8 mm, and decreased by 28.0% when the diameter decreased to 6 mm. When the length was constant and the diameter was decreased from 10 mm to 8 mm and then to 6 mm, the hydraulic plugging effect became better, and the trend increased from 33.7% to 37.2%.