Related Experiment Video
Updated: May 16, 2025

Author Spotlight: Standardizing the Development of Amine-Based Silica Composites as CO2 Adsorbents for Direct Air Capture
Published on: September 29, 2023
From proof to practice - Sampling and analysis for simplified quantification of siloxanes in biogas
Ayush Agarwal1, Laura Torrent2, Julian Indlekofer3
1Paul Scherrer Institute, PSI Center for Energy and Environmental Sciences, 5232 Villigen PSI, Switzerland; École Polytechnique Fédérale de Lausanne (EPFL), School of Architecture, Civil and Environmental Engineering (ENAC IIE GR-LUD), 1015 Lausanne, Switzerland.
Abstract:
Siloxanes in biogas pose significant challenges to energy systems, leading to operational inefficiencies and increased maintenance costs. This study advances the liquid quench sampling system (LQ) for accurate quantification of siloxanes using gas chromatography hyphenated with inductively coupled plasma mass spectrometry (GC-ICP-MS). The LQ demonstrated a capture efficiency exceeding 94 % over a broad concentration range, with sample stability tests indicating < 10 % analyte loss over four weeks. A Round Robin Test with nine independent laboratories validated the method's reliability. Calibration with liquid standards is demonstrated, eliminating complications associated with gaseous standards. On-site sampling with centralized analysis makes the method feasible for facilities lacking advanced instrumentation. By accurately quantifying siloxanes, this approach supports optimization of gas cleaning systems to extend equipment life. This LQ-GC-ICP-MS method enables practical sampling and simplified quantification for effective siloxane monitoring to enhance biogas utilization.
Related Concept Videos
Sampling Methods: Sample Types
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...
Sample Preparation for Analysis: Overview
Bulk or large solid samples are typically reduced in size using grinding, crushing, or milling techniques to increase the...

