Effects of Dust and Moisture Surface Contaminants on Automotive Radar Sensor Frequencies

Perception and sensing of the surrounding environment are crucial for ensuring the safety of autonomous driving systems. A key issue is securing sensor reliability from sensors mounted on the vehicle and obtaining accurate raw data. Surface contamination in front of a sensor typically occurs due to adverse weather conditions or particulate matter on the road, which can degrade system reliability depending on sensor placement and surrounding bodywork geometry. Moreover, the moisture content of dust contaminants can cause surface adherence, making it more likely to persist on a vertical sensor surface compared to moisture only. In this work, a 76-81 GHz radar sensor, a 72-82 GHz automotive radome tester, a 60-90 GHz vector network analyzer system, and a 76-81 GHz radar target simulator setup were used in combination with a representative polypropylene plate that was purposefully contaminated with a varying range of water and ISO standard dust combinations; this was used to determine any signal attenuation and subsequent impact on target detection. The results show that the water content in dust contaminants significantly affects radar signal transmission and object detection performance, with higher water content levels causing increased signal attenuation, impacting detection capability across all tested scenarios.