Related Experiment Video
Updated: May 13, 2025

Evaluating the Effect of Roadside Parking on a Dual-Direction Urban Street
Published on: January 20, 2023
A reliability analysis method based on cross-entropy importance sampling for lateral safety assessment of misaligned
Jilong Chen1, Feng Chen1, Suiyang Zhao1
1The Key Laboratory of Road and Traffic Engineering, Ministry of Education, Tongji University, 4800 Cao'an Road, Jiading, Shanghai 201804, China.
Abstract:
Autonomous truck platooning offers a range of advantages in freight transportation, including energy efficiency and operational effectiveness, and has garnered increasing attention. But traditional truck platoons, typically aligned in a straight line, can cause channelized damage to road surfaces due to the concentrated load over short durations. To enhance pavement sustainability, the concept of misaligned truck platoons has been explored, wherein trucks within the platoon intentionally drift laterally by varying amounts. Nevertheless, the misalignment introduces concerns regarding the lateral safety performance of the trucks. To investigate the lateral safety of misaligned autonomous truck platoons under crosswinds, this paper introduces an innovative and efficient approach. Using a three-truck platoon as an example, Cross-Entropy Importance Sampling (CE-IS) is utilized to estimate the lateral risk probability of misaligned truck platoons with a randomized distribution across multiple indicators, and the results are compared with those obtained using the Monte Carlo Simulation (MCS). The results indicate that CE-IS significantly reduces computation time while maintaining high accuracy. This computational efficiency makes CE-IS particularly suitable for intelligent freight systems, where rapid and reliable risk assessment is critical for dynamic platoon coordination, real-time safety management, and optimization under uncertain conditions. Under a consistent in-lane lateral distribution control mode, misaligned truck platoons are more prone than aligned platoons to encroaching into adjacent lanes, thereby increasing the risk of accidents. However, reorganizing the middle truck in a misaligned platoon to establish a misalignment distance away from the lane marking can reduce the lateral risk probability, though it remains slightly higher than that of aligned platoons. This study contributes to the efficient and accurate quantification of lateral risk in vehicle platoon systems. Additionally, it provides valuable insights into enhancing the lateral safety of coordinated truck platoons and mitigating their impact on road surfaces. And this method combining CE-IS proposed in this study can efficiently quantify and calculate the lateral risk of vehicle platoons in intelligent freight systems, providing suggestions for real-time operational strategies.
Related Concept Videos
Introduction to Test of Independence
The test statistic for a test of independence is similar to that of a goodness-of-fit test:
Distribution Reliability and Automation
Multimachine Stability
In analyzing the system, the nodal equations represent the relationship between bus voltages, machine voltages, and machine currents. The nodal equation is given by:
Beams with Unsymmetric Loadings
The first moment-area theorem determines the slope at any point on the beam. This theorem indicates that the change in slope between two points on a beam...
Determination of Expected Frequency
Hypothesis Test for Test of Independence
H0: The two variables (factors)...

