Related Experiment Video
Updated: May 2, 2026

Gradient Echo Quantum Memory in Warm Atomic Vapor
Published on: November 11, 2013
Electric-field sensing with driven-dissipative time crystals in room-temperature Rydberg vapor
1Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA, 91109, USA. darmindra.d.arumugam@jpl.nasa.gov.
Abstract:
Mode competition in nonequilibrium Rydberg gases enables the exploration of emergent many-body phases. This work leverages this emergent phase for electric field detection at room temperature. Sensitive frequency-resolved electric field measurements at very low-frequencies (VLF) are of central importance in a wide range of applications where deep-penetration is required in communications, navigation and imaging or surveying. The long wavelengths on order of 10-100 km (3-30 kHz) limit the efficiency, sensitivity, and bandwidth of compact classical detectors that are constrained by Chu's limit. Rydberg-atom electrometers are an attractive approach for microwave electric-field sensors but have reduced sensitivity at lower-frequencies. Very recent efforts to advance the standard Rydberg-atoms approach is based on DC electric-field (E-field) Stark shifting and have resulted in sensitivities between 67.9 and 2.2 uVcm-1Hz-1/2 (0.1-10 kHz) by fine optimization of the DC E-field. A major challenge in these approaches is the need for embedded electrodes or plates due to DC E-field Stark screening effect, which can perturb coupling of VLF signals when injected from external sources. In this article, it is demonstrated that state-of-art sensitivity ((1.60 ± 0.23) uVcm-1Hz-1/2) can instead be achieved using limit-cycle oscillations in driven-dissipative Rydberg atoms by using a magnetic field (B-field) to develop mode-competition between nearby Rydberg states. The mode-competition between nearby Rydberg-states develop an effective transition centered at the oscillation frequency capable of supporting external VLF E-field coupling in the ~ 10-15kHz regime without the requirement for fine optimization of the B-field magnitude.

