Related Experiment Video
Updated: May 11, 2025

Isolation of Native Soil Microorganisms with Potential for Breaking Down Biodegradable Plastic Mulch Films Used in Agriculture
Published on: May 10, 2013
Characterization of Biobased Polymers at the Gas-Solid Interface─Analysis of Surface and Bulk Properties during
T Borgmeyer1, Y Kupper2, M J Rossi1
1École Polytechnique Fédérale de Lausanne (EPFL), GR-LUD, School of Architecture, Civil and Environmental Engineering (ENAC IIE), Station 6, CH-1015 Lausanne, Switzerland.
Abstract:
Accurately assessing the interfacial composition and reactivity of (bio)polymers under controlled but environmentally relevant conditions remains challenging. This study explores the evolution of surface functionalities of novel polyesters Poly(Butylene Xylose) (PBX) and Poly(Alkyl Xylose Amide) (PAXA) under artificial degradation conditions. Employing a Knudsen Flow Reactor (KFR) and a gas-titration approach, we systematically analyze the chemical transformations occurring at the polymer's solid-gas interface. Both polymers are derived from the same functionalized lignocellulosic sugar building block, Diglyoxylic Acid Xylose (DGAX). Virgin (V), long-term UV (UV), and short-term Ozone (O3) exposures induce specific but differing alterations in molecular integrity and surface reactivity, resulting in notable shifts in material properties and polymer structure. Contrary to the assumption that degradation increases specific surface area (SSA) and reactivity, our results reveal cases where the SSA decreases, with reactivity either increasing or decreasing based on the reactive groups available at the interface. Both polymers exhibited increased water affinity, acidification, and ozone reactivity following UV exposure. Interfacial reactivity, assessed with trifluoroacetic acid, hydroxylamine, and nitrogen dioxide, increased for PBXUV but decreased for PAXAUV. Surface hydroxyl groups in PAXA reduced 5-fold under short-term ozone and long-term UV exposure, while bulk transport kinetics of hydroxylamine altered with long-term degradation, though ozone exposure left transport mechanisms unaffected. This combined interfacial and bulk analysis approach advances our understanding of (bio)plastic degradation. It examines the role of degraded polymers as potentially more or less reactive vectors for chemicals and organisms upon environmental release while also demonstrating that polymer degradation initiates significantly earlier than previously assumed.
Related Concept Videos
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the...
Step-Growth Polymerization: Overview
Many natural and synthetic polymers are produced by...
Polymer Classification: Stereospecificity
Polymer Classification: Crystallinity
Crystalline domains are the regions where polymer chains are aligned in an orderly manner and held together in proximity by intermolecular forces. For example, chains in the crystalline domains of polyethylene and nylon are bound together by van der Waals...
Free-Radical Chain Reaction and Polymerization of Alkenes

