Related Experiment Video

Updated: May 10, 2025

A Detailed Protocol for Perspiration Monitoring Using a Novel, Small, Wireless Device
05:32

A Detailed Protocol for Perspiration Monitoring Using a Novel, Small, Wireless Device

Published on: November 24, 2016

7.8K

Janus cotton with unidirectional-wicking, tri-mold cooling and antibacterial performance for personal

Nan Li1, Zulong Zhang1, Jintao Zhu1

  • 1Institute of Functional Textiles and Advanced Materials, Center for Advanced Fire-Safety Materials D & A (Shandong), College of Textiles & Clothing, State Key Laboratory of Bio-Fibers and Eco-Textiles, Qingdao University, Qingdao 266071, China.

International Journal of Biological Macromolecules
|April 21, 2025
PubMed

Keywords:
Heat convectionJanus fabricThermal-moisture managementUnidirectional moisture-wicking

More Related Videos

Wicking Tests for Unidirectional Fabrics: Measurements of Capillary Parameters to Evaluate Capillary Pressure in Liquid Composite Molding Processes07:06

Wicking Tests for Unidirectional Fabrics: Measurements of Capillary Parameters to Evaluate Capillary Pressure in Liquid Composite Molding Processes

Published on: January 27, 2017

8.7K
Synthesis of PolyN-isopropylacrylamide Janus Microhydrogels for Anisotropic Thermo-responsiveness and Organophilic/Hydrophilic Loading Capability09:09

Synthesis of PolyN-isopropylacrylamide Janus Microhydrogels for Anisotropic Thermo-responsiveness and Organophilic/Hydrophilic Loading Capability

Published on: February 27, 2016

9.9K

Related Concept Videos

Thermoregulation01:26

Thermoregulation

The human body has a sophisticated thermoregulation system that employs negative feedback mechanisms to maintain an optimal core temperature. When the core temperature drops, peripheral and central thermoreceptors send signals to the hypothalamus, activating the heat-promoting center. This center triggers several responses aimed at increasing the core temperature. First, vasoconstriction reduces the flow of warm blood from internal organs to the skin so that the heat is not lost from the skin,...
698
Masonry in Cold and Hot Weather Conditions01:21

Masonry in Cold and Hot Weather Conditions

In cold weather, masonry construction requires specific precautions to ensure mortar does not freeze before curing, as this can significantly weaken its strength and watertightness. Mortar temperature should be maintained between 60°F and 80°F to support proper hydration and curing. Below 40°F, mortar water must be heated, but should not exceed 120°F as high temperatures can reduce mortar's compressive and bond strength.
Other key practices include keeping masonry units...
66
Personal Protective Equipment01:20

Personal Protective Equipment

Personal protective equipment (PPE) is unique clothing or equipment worn by an employee to minimize or prevent exposure to infectious agents. PPE creates a barrier between the employee and the infectious materials. PPE must be readily available in the patient care area. PPE includes gloves, gowns and aprons, masks and respirators, goggles, face shields, shoes, and headcovers:
1.5K
Thermosensation01:43

Thermosensation

Peripheral thermosensation is the perception of external temperature. A change in temperature (on the surface of the skin and other tissues) is detected by a family of temperature-sensitive ion channels called Transient Receptor Potential, or TRP, receptors. These receptors are located on free nerve endings. Those detecting cold temperatures are closer to the surface of the skin than the nerve endings detecting warmth. These thermoTRP channels, while temperature selective, have relatively...
30.2K
Drying Shrinkage01:21

Drying Shrinkage

When hardened concrete is exposed to air with a relative humidity of less than 100 percent, it begins to lose the free water within its capillaries. As this water evaporates, the water initially adsorbed onto the calcium silicate hydrates migrates towards these now empty spaces and eventually evaporates as well. Over time, as more water leaves, the volume of the concrete decreases, a phenomenon known as drying shrinkage.
A portion of this drying shrinkage can be reversed; if the concrete is...
53
PPE Use in Healthcare Settings II: Doffing01:10

PPE Use in Healthcare Settings II: Doffing

The sequence of removing or doffing PPE starts with the gloves, as they are the most contaminated. Next is removal of the face shield or goggles, as they would interfere with removing other PPE. Then remove the gown, followed by the mask or respirator. Perform hand hygiene between steps if hands become contaminated and immediately after removing all PPE. Generally, the outside front and sleeves of the isolation gown, the goggles or the mask, the respirator, and the face shield are contaminated.
864