Related Experiment Video
Updated: Jul 15, 2026

Microfluidic Picoliter Bioreactor for Microbial Single-cell Analysis: Fabrication, System Setup, and Operation
Published on: December 6, 2013
Real-time monitoring method of microbial growth using a simple pressure-based respiration detection system
Nara Shin1, Jinok Oh1, Yebin Han1
1Advanced Materials Program, Department of Biological Engineering, College of Engineering, Konkuk University, Seoul, Republic of Korea.
Abstract:
Dry cell weight (DCW) and optical density (OD) measurement methods provide useful data for assessing microbial growth. However, their sampling process is labor-intensive and time-consuming. Therefore, we aimed to evaluate a method for measuring microbial growth through continuous CO2 measurement under aerobic conditions using a pressure-based respiration detection system, which is traditionally used in anaerobic environments and applies measurement of reduced pressure by capturing CO2 with KOH. The pressure reduction rate, OD, and DCW values were compared during Ralstonia eutropha H16 culture, which revealed a correlation of R2 of 0.99 between the pressure reduction and DCW and a change of DCW (g/L) per pressure (1 mbar) of -0.02 g/L. It showed theoretical limit of detection at 14.67 mbar corresponding to 0.0428 g/L of DCW and theoretical limit of quantification at 48.9 mbar as lower limits. When the pressure-based method was applied to compare carbon source utilization and growth of different strains, such as E. coli sp., Pseudomonas sp., Burkholderia sp., and Bacillus sp., it showed a high correlation with DCW. Overall, these results demonstrate that the pressure-based respiration detection system is a reliable tool for microbial growth monitoring and offers significant advantages by providing real-time data with less labor.
More Related Videos
05:21Operation of Laboratory Photobioreactors with Online Growth Measurements and Customizable Light Regimes
Published on: October 28, 2021
09:15Enhanced Reproducibility and Precision of High-Throughput Quantification of Bacterial Growth Data Using a Microplate Reader
Published on: July 27, 2022
Related Concept Videos
Microbial Growth Measurement: Direct Methods
Microbial Growth Measurement: Indirect Methods
Methods to Assess Microbial Populations
Bioreactor Controls-I
Microbial Biosensors