Related Experiment Video
Updated: May 9, 2025

Conducting Elevated Temperature Normal and Combined Pressure-Shear Plate Impact Experiments Via a Breech-end Sabot Heater System
Published on: August 7, 2018
Study on the effect of load on the structural response of projectile during penetration process
Jun Liang1, Xuanhua Fan2, Tao Li1
1Mianyang Teachers' College, Mianyang, 621000, Sichuan, China.
Abstract:
To delve deeper into the dynamic behaviors of a typical projectile structure subjected to multi-pulse loading, this paper focuses on the scenario of a projectile positively penetrating an equally spaced, multi-layer target. It proceeds by designing multi-pulse excitation loads that vary in temporal intervals and amplitudes. These designed loads are subsequently incorporated into an experimental model to systematically investigate how load parameters, specifically the pulse period, pulse width, and pulse amplitude, influence the amplification of the projectile structure's vibration response. Additionally, a theoretical model is formulated to validate and ensure the reliability of the experimental findings obtained. The results show that: Variations in the pulse period can elicit vibration superposition, thereby markedly altering the magnitude of the projectile charge's acceleration response. The peak value of the acceleration response of the projectile charge increases for high amplitude loads compared to low amplitude loads in a half-sine shock, but the magnification of the charge acceleration response may decrease. There is indeed a 'small load, large response'.
Related Concept Videos
Impact Loading
In cases of elastic deformation,...
Impact Loading on a Cantilever Beam
When an object is dropped onto the free end of a cantilever, its potential energy due to gravity is...
Impact: Problem Solving
By designating the launch point as the origin and utilizing kinematic equations, the vertical component of the projectile's velocity at the point of impact is...
Stress: General Loading Conditions
The shearing force, possessing potential directionality within the plane of the section, is simplified into two component forces running parallel to the x and y axes....
Internal Loadings in Structural Members: Problem Solving
To illustrate this, let's consider a beam OC of 5 kN, inclined at an angle of 53.13° with the horizontal and supported at both ends. Determine the internal...
Load along a Single Axis
Consider a beam of length L subjected to a varying load, which is a combination of parabolic and trapezoidal load distribution along the x-axis. In this case, it is essential to determine the resultant loads, their locations, and...

