Related Experiment Video
Updated: May 9, 2025

Infrared Degenerate Four-wave Mixing with Upconversion Detection for Quantitative Gas Sensing
Published on: March 22, 2019
Parts-per-quadrillion level gas molecule detection: CO-LITES sensing
Haiyue Sun1,2, Shunda Qiao1,2, Ying He1,2
1National Key Laboratory of Laser Spatial Information, Harbin Institute of Technology, Harbin, 150001, China.
Abstract:
Highly sensitive gas detection plays a crucial role in advanced scientific and technological fields. This paper presents a parts-per-quadrillion (ppq) level ultra-highly sensitive light-induced thermoelectric spectroscopy (LITES) sensor for the first time. The artificial fish swarm algorithm auto-designed multi-pass cell (MPC) with double helix pattern, and the polymer modified round-head quartz tuning fork (QTF) with low-resonant frequency (f0) were adopted to improve the gas absorption and QTF's detection ability. The obtained MPC, with a long optical path length (OPL) of 25.8 m and a small volume of 165.8 ml, is beneficial for increasing gas absorption while keeping the sensor compact. The novel QTF was structurally optimized to obtain low f0 (~9.5 kHz) and modified by polydimethylsiloxane (PDMS) to reduce heat diffusion and enhance vibration amplitude. A strong absorption line of carbon monoxide (CO) located in the mid-infrared region (4.59 μm) was chosen as the target line. The signal-to-noise ratio (SNR) of CO-LITES sensor based on the novel QTF was improved by 10.59 times, reaching the highest level when compared to the commercial QTF. The corresponding minimum detection limit (MDL) was calculated to be 23 ppt. When the integration time of the sensor system was increased to 500 s, the MDL could be improved to 920.7 ppq. Compared to the reported spectroscopy techniques for CO gas detection, the LITES sensor in this study offers an excellent result in terms of detection sensitivity.
Related Concept Videos
Gas Chromatography: Types of Detectors-II
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
Flame Photometry: Lab
Mass Analyzers: Common Types
High-Performance Liquid Chromatography: Types of Detectors

