Highly Stable and Integrable Graphene/Molybdenum Disulfide Heterojunction Field-Effect Transistor-Based miRNA
Chen Wang1,2, Ziqian Wang1,3, Ming Gao2
1State Key Laboratory of Radio Frequency Heterogeneous Integration, International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology, Institute for Advanced Study in Nuclear Energy and Safety, Interdisciplinary Center of High Magnetic Field Physics of Shenzhen University, College of Physics and Optoelectronic Engineering, Shenzhen University, Shenzhen518060, China.
Abstract:
MicroRNAs (miRNAs) are important noncoding RNA molecules that participate in gene regulation and are widely associated with the occurrence and development of various cancers. Developing rapid, highly sensitive, low-cost, and highly stable miRNA detection methods is of great significance for clinical diagnosis. Field-effect transistors (FETs) based on two-dimensional (2D) materials have been proven to have great potential in the field of miRNA detection due to their label-free, rapid, highly sensitive, low-power, and portable features. However, biosensors based on 2D material FETs require the application of an external gate voltage in solution, which seriously hinders the integration, miniaturization, and signal stability of the devices. This study proposes a graphene-molybdenum disulfide heterojunction (G/MoS2) FET biosensing platform to detect miRNA-21 and miRNA-155 without the need for an external gate voltage. The results demonstrate a detection time of approximately 30 min, a linear response range spanning from 10 fM to 10 nM, and limits of detection of 6.06 fM for miRNA-21 and 2.59 fM for miRNA-155. Through comparative experiments, the biosensor shows excellent selectivity and can distinguish target miRNAs from nontarget miRNAs. The G/MoS2 FET biosensor developed in this study provides a technical platform for miRNA detection and has a broad application prospect, especially in the early diagnosis of diseases and the screening of biomarkers.
Related Concept Videos
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no current...
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The semiconductor's...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...


