Related Experiment Video
Updated: May 14, 2025

Sulfate Separation by Selective Crystallization with a Bis-iminoguanidinium Ligand
Published on: September 8, 2016
Modulating Surfaces Hydrophobicity of Molybdenite and Galena through Sulfuric Acid Pretreatment for Efficient
Jianjuan Li1,2, Haiyun Xie1,2,3, Peilun Shen1,3
1Faculty of Land Resources Engineering, Kunming University of Science and Technology, Kunming, Yunnan 650093, China.
Abstract:
Molybdenite and galena are often associated in polymetallic sulfide deposits in complex forms, and the separation of the two minerals has become a difficult and hot spot. In this article, a new method combining sulfuric acid pretreatment with flotation is proposed to realize the selective separation of molybdenite and galena. Microflotation tests were used to investigate the effect of sulfuric acid pretreatment on the floatability of molybdenite and galena. Contact angle measurement and XPS and SEM-EDS analyses revealed the mechanism of sulfuric acid pretreatment on the surface properties of molybdenite and galena. The microflotation test of single minerals results showed that sulfuric acid concentration, pretreatment temperature, and time had important effects on the surface properties of molybdenite and galena. Under the optimal conditions of sulfuric acid concentration of 3 mol/L, pretreatment temperature of 100 °C, and time of 30 min, the floatability of molybdenite was almost unaffected and still good, while galena is inhibited and almost unfloatable, which produces the largest difference in floatability between the two minerals. The test results of pretreatment-flotation separation of the molybdenite-galena mixture showed that the new process achieved efficient flotation separation of molybdenite and galena, which further confirmed the microflotation results of a single mineral. The contact angle, XPS, and SEM-EDS analyses showed that the surface of galena was oxidized to form a rough passivation layer of PbSO4 after pretreatment, which resulted in the loss of hydrophobicity and floatability, while the surface properties of molybdenite did not change significantly before and after pretreatment. The new method of flotation separation of molybdenite and galena based on surface pretreatment provided a potential application prospect for the difficult separation of lead-molybdenum polymetallic sulfide ores.
More Related Videos
08:12Surface Functionalization of Metal-Organic Frameworks for Improved Moisture Resistance
Published on: September 5, 2018
08:50Preparation of Large-area Vertical 2D Crystal Hetero-structures Through the Sulfurization of Transition Metal Films for Device Fabrication
Published on: November 28, 2017
Related Concept Videos
Precipitation and Co-precipitation
Extraction: Advanced Methods
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
Colloidal precipitates