Mesoscopic Perspective into the High-Temperature Triaxial Dilation of Asphalt Mixtures via PFC-FLAC Coupled...

The high-temperature rutting performance of asphalt mixtures is strongly dependent on the aggregate skeleton and particle movement under loading. Such mechanisms were addressed in the present study by a combined experimental and simulation approach based on the triaxial strength test. A single type of asphalt with two different aggregate gradations (dense and gap) was incorporated to highlight the role of gradation in resisting shear dilation. The simulation was carried out by coupling the discrete and finite element methods considering the realistic three-dimensional aggregate shapes and gradations as well as the flexible boundary prescribed by latex membranes as routinely employed in triaxial testing. In order to represent contact failure-induced cracks within the virtual specimens, the linear parallel bond model was mixed with the Burgers or linear model through random distribution at contacts involving the mortar units. Model verification was achieved by comparing the resulting stress-strain data against those from the laboratory. The calibrated model provided a platform for systematic investigation from the perspectives of particle movement, crack development and distribution, and interparticle contacts. The results showed that the gap-graded mixture yielded lower triaxial strengths and yet softened at a lower rate and exhibited smaller volumetric expansion in the post-peak region. A faster loss of internal cohesion was inferred in the dense-graded mixture based on the higher accumulation rate of cracks that were concentrated at the middle height towards the perimeter of the virtual specimen. Contact analysis indicated that aggregate skeleton was more influential in the strength and stability of gap-graded mixtures.