Related Experiment Video
Updated: May 17, 2025

Non-contact, Label-free Monitoring of Cells and Extracellular Matrix using Raman Spectroscopy
Published on: May 29, 2012
Transmission Raman Spectroscopy for Inner Layers Chemical Analysis of Fresh Produce
1Institute of Agricultural and Biosystems Engineering, Agricultural Research Organization-Volcani Institute, Rishon LeZion 7505101, Israel.
Abstract:
Identification of chemical properties in the inner tissues of fresh produce would enable us to identify major issues plaguing the agriculture supply chain, like off-flavors and core rot since these are caused by or accompanied by known chemical elements. We show the development of transmission Raman spectroscopy system for identifying these elements by addressing several issues: we located an optimal spectral window by conducting optical attenuation measurements and calculated the required LASER power in that range. For apple tissues, this optical window was found in the 700-950 nm range, and the required LASER power range was calculated to be in the 40-700 mW range. We also calculated that the optimal shifted-excitation Raman difference spectroscopy wavelengths should be separated by 0.7 nm in order to optimally produce narrow and high-intensity Raman peak features and eliminate the competing fluorescence signal. Finally, we provide a complete optical system design with exact optimal parameters. In contrast to other fields like pharmaceuticals and medicine, transmission Raman spectroscopy has not been applied extensively in agriculture. Therefore, this study fills a gap in that field's applicability.
More Related Videos
Related Concept Videos
Raman Spectroscopy: Overview
However, a small fraction of the scattered light exhibits a frequency shift due to the exchange of energy between the incident photons and...
Raman Spectroscopy Instrumentation: Overview
The monochromatic laser source, typically using visible or near-infrared radiation, generates a highly focused beam of light. This light interacts with the molecules of the sample, scattering some of the light. Liquid and gaseous samples are usually tested in ordinary glass capillaries, while solids can be analyzed as powders packed in capillaries or as potassium...
Attenuated Total Reflectance (ATR) Infrared Spectroscopy: Overview
The ATR process begins by directing a beam...

