Recast Layer-Induced Fatigue Degradation in High-Speed EDM Microholes: Experimental Characterization

High-speed electrical discharge machining (EDM) is crucial for drilling aerospace components, but the fatigue effects of its recast layer are still not well understood. This study investigates the fatigue behavior of high-speed EDM-processed specimens using ultrasonic fatigue testing and microscopic analysis. The recast layer showed a 20.4% increase in hardness and a 16.5% decrease in elastic modulus compared to the base material. Fatigue cracks originated from microcracks, pores, and inclusions within the recast layer, as well as at its interface with the substrate. Microscopic crack initiation was influenced by defect interactions, while macroscopic crack initiation occurred near the maximum hole diameter perpendicular to the loading direction due to stress concentration. The specimens exhibited bimodal fatigue life: shorter lifetimes were observed when macroscopic stress concentrations overlapped with recast layer defects such as cracks and voids, while defect-free regions significantly extended durability. The non-uniform distribution of the recast layer critically links microstructural heterogeneity to variations in fatigue failure. These findings highlight how recast layer characteristics influence crack nucleation and life variability in EDM-processed components, offering valuable insights for optimizing machining parameters to reduce fatigue risks in critical aerospace applications.