Related Experiment Video
Updated: Jul 17, 2026

Fabrication of Carbon Nanotube High-Frequency Nanoelectronic Biosensor for Sensing in High Ionic Strength Solutions
Published on: July 22, 2013
Gate Voltage Regulation of Surface Properties in Polyethylenimine-Doped Indium Oxide Transistors for Enhanced
Chengyao Liang1, Fuguo Wang2, Jiongyue Hao1
1Key Laboratory of Optoelectronic Technology and Systems of the Education Ministry of China, College of Optoelectronic Engineering, Chongqing University, Chongqing 400044, China.
Abstract:
Nitrogen dioxide (NO2), a toxic environmental pollutant, requires high-performance sensors for ppb-level detection. While indium oxide thin-film transistors (In2O3 TFTs) show promise, conventional devices require costly vacuum equipment, unlike solution-processed spin-coating, which is suitable for scalable fabrication. Channel doping enhances gas sensing performance but degrades transistor output current. This work introduces polyethylenimine (PEI) as the electron dopant for solution-processed In2O3 TFTs. PEI provides abundant electrons for NO2 interaction, but the limited current-driving capability of resistive sensors fundamentally restricts their detection sensitivity to such low-amplitude signals. Gate voltage-regulated surface electronic states in thin films significantly enhance the current-driving capability, enabling ultrasensitive NO2 detection down to subppb concentrations. The 1% PEI-doped In2O3 TFT demonstrates a saturation drain current of 0.065 mA, representing a 1.91-fold enhancement over the undoped counterpart (0.034 mA). Furthermore, the optimized 1% PEI: In2O3 TFT achieves a 23% response toward 10 ppb NO2.

