Related Experiment Video
Updated: Sep 19, 2025

Measuring Carbon-based Contaminant Mineralization Using Combined CO2 Flux and Radiocarbon Analyses
Published on: October 21, 2016
Acid mine drainage and waste dispersion in legacy mining sites: An integrated approach using UAV photogrammetry and
Ana Barroso1, Renato Henriques1, Ângela Cerqueira1
1Universidade do Minho, Campus de Gualtar, Institute of Earth Sciences, Braga 710-057, Portugal.
Abstract:
Abandoned mines pose environmental risks due to the accumulation of sulfide-rich waste, which generates acid mine drainage and produces fine-grained, unconsolidated materials that, when deposited on steep slopes, accelerate erosion and contaminant transport. This study assesses the environmental impact of the Trimpancho mining complex by integrating UAV-based photogrammetry, water analysis, and mine waste characterization. Aerial surveys produced high-resolution orthomosaics and digital surface models, enabling the identification of runoff patterns, erosion hotspots, and waste accumulation. The estimated waste volume is approximately 253,377 m³ . Key findings highlight critical erosion areas on steep slopes (>30°) where waste mobilization enhances metal and sulfate transport into the Trimpancho stream, affecting the Chança River. Water samples have pH values ranging from 2.59 to 8.27, electrical conductivity peaking at 4171 µS/cm, and elevated concentrations of iron (65.7 mg/L), aluminum (174 mg/L), manganese (23.5 mg/L), and zinc (20.7 mg/L). Mine waste characterization revealed that Nuestra Señora del Carmen dump exhibited higher leaching potential compared to Volta Falsa. This study underscores the value of UAV technology for cost-effective and high-resolution environmental monitoring in abandoned mines. The results emphasize the need for targeted remediation strategies and water quality improvement. This multi method approach can serve as a model for assessing contamination risks and optimizing environmental monitoring programs in other legacy mining sites.
Related Concept Videos
Manipulation and Analysis
Design Example: Identifying the Locations of Monuments in the Field Using Global Positioning System Device
Methods of Obtaining Topography
Gravimetry: Overview
In precipitation gravimetry, the analyte is converted into a precipitate and weighed. For example, the silver content in a sample can be estimated by precipitating and...

