Related Experiment Video
Updated: Jun 12, 2025

Sulfate Separation by Selective Crystallization with a Bis-iminoguanidinium Ligand
Published on: September 8, 2016
Study on the Process and Mechanism of Removing Chloride Ions from Desulfurization Ionic Liquid by Modified Ion
Guibin Wang1, Lijuan Liu1, Yanlong He1
1School of Petrochemical Engineering, Lanzhou University of Technology, Lanzhou 730050, Gansu, China.
Abstract:
In the ionic liquid desulfurization system, the repeated circulation and regeneration of the ionic liquid lead to the continuous accumulation of Cl-, resulting in decreased desulfurization performance, increased ionic liquid loss, and exacerbated equipment corrosion. Therefore, the effective removal of Cl- from the desulfurization of ionic liquids is of great significance. This paper discusses the use of modified 717 resin for the removal of Cl- from a desulfurization ionic liquid. First, the adsorption equilibrium, adsorption thermodynamics, and adsorption kinetics of the modified 717 resin for Cl- were studied. The adsorption isotherm conforms to the Langmuir model, with an adsorption enthalpy of 1.971 kJ mol-1, indicating that the process is a monolayer endothermic reaction. The adsorption kinetics follow a pseudo-second-order kinetic model, suggesting that the adsorption rate is controlled by chemical adsorption. Second, through dynamic adsorption experiments, it was determined that the optimal process parameters for Cl- removal were: liquid flow rate of 2 mL/min, bed height of 10 cm, initial Cl- concentration of 2300 mg/L, and reaction temperature of 45 °C. The dynamic behavior of the modified 717 resin in adsorbing Cl- conforms to the Thomas model and the Yoon-Nelson model. Then, the equilibrium adsorption capacity of Cl- of the modified 717 resin decreased by only 1.42 mg/g after five regeneration experiments, indicating that the resin has good renewability. Finally, the modified 717 resin removes Cl- from the actual desulfurization ionic liquid with good results. This study provides a theoretical basis for the industrial application of ion exchange resins for the removal of Cl- from desulfurization ionic liquids.
More Related Videos
11:04Synthesis of Ionic Liquid Based Electrolytes, Assembly of Li-ion Batteries, and Measurements of Performance at High Temperature
Published on: December 20, 2016
08:06Merging Ion Concentration Polarization between Juxtaposed Ion Exchange Membranes to Block the Propagation of the Polarization Zone
Published on: February 23, 2017
Related Concept Videos
Ion Exchange
Extraction: Advanced Methods
Carboxylic Acids to Acid Chlorides
Formation of Complex Ions
Precipitation and Co-precipitation
Factors Affecting Solubility