Related Experiment Video
Updated: Sep 19, 2025

Effect of Bending on the Electrical Characteristics of Flexible Organic Single Crystal-based Field-effect Transistors
Published on: November 7, 2016
From Structure to Performance: The Critical Role of DNTT Morphology in Organic TFTs
Mattia Scagliotti1, Antonio Valletta1, Silvia Milita2
1CNR-IMM, Institute for Microelectronics and Microsystems IMM, Rome 00133, Italy.
Abstract:
The electrical performance of organic thin-film transistors (OTFTs) based on DNTT as the semiconductor active layer (DNTT, which stands for dinaphtho [2,3-b:2',3'-f] thieno [3,2-b] thiophene) is investigated and related to the structural properties of the organic films grown on SiO2 and Cytop substrates. Conventional current-voltage measurements and high-sensitivity low-frequency measurements show a lower mobility and correspondingly higher defect density for DNTT/SiO2 devices. Morphological and structural characterizations of DNTT films grown on the two dielectrics were performed using atomic force microscopy (AFM) and X-ray diffraction (XRD), revealing a highly ordered crystalline structure. Consistent with DFT simulation results, morphological analysis shows that the semiconductor films are layered, with DNTT molecules arranged with their longest axis perpendicular to the substrate. However, in only DNTT/SiO2 films, some molecules were found to be ordered and arranged parallel to the substrate. This "horizontal" orientation causes differences in charge transport properties in the semiconductor films grown on SiO2, reducing the field-effect mobility. TCAD simulations indicate that this horizontal molecular orientation can be modeled as highly defective regions at semiconductor grain boundaries, consistent with low-frequency noise measurement results.
Related Concept Videos
Field Effect Transistor
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Bipolar Junction Transistor

