Related Experiment Video
Updated: Sep 18, 2025

Measuring Dissolved Methane in Aquatic Ecosystems Using An Optical Spectroscopy Gas Analyzer
Published on: July 26, 2024
Parts-per-Trillion-Level Methane Detection Based on Light-Induced Thermoelastic Spectroscopy with Extended Optical
Yanjun Chen1, Xiaorong Sun1,2, Hanxu Ma1,2
1National Key Laboratory of Laser Spatial Information, Harbin Institute of Technology, Harbin 150000, China.
None:
This paper describes a highly sensitive methane (CH4) sensor utilizing light-induced thermoelastic spectroscopy (LITES), which incorporates a multipass cell (MPC) with a dense spot configuration and a self-designed round-tip quartz tuning fork (QTF). The designed MPC can achieve a long optical path length of 77.36 m and a large ratio of optical path length to volume (RLV) of 20.55 cm-2. A novel round-tip QTF with a low frequency of 9.7 kHz is used as the photothermal detector of the sensor. A continuous wavelength distributed feedback (CW-DFB) diode laser capable of a 10 mW maximum output is employed to stimulate the CH4 absorption line at 1650.96 nm. Aiming to boost the CH4-LITES sensor's detection ability, the laser power is amplified to 200 mW via the integration of a Raman fiber amplifier (RFA) into the optical path. Detailed testing is conducted to assess the sensor's performance. The results reveal that the CH4-LITES sensor has excellent linearity and an optical power response. The novel round-tip QTF brings about a 3.61-fold enhancement in the minimum detection limit (MDL) of the sensor when compared with the commercial QTF. Eventually, the Allan deviation method enables the LITES sensor to reach a detection limit of 600 ppt for CH4.
Related Concept Videos
Gas Chromatography: Types of Detectors-II
Flame Photometry: Overview

