Analysis of the deterioration process of DC XLPE cable with protrusion defect based on the development of partial...

High-voltage direct current (HVDC) cables are essential for long-distance power transmission, particularly in renewable energy applications. Cross-linked polyethylene (XLPE) insulation is commonly used in these cables, but protrusion defects that occur during manufacturing can distort the electric field and initiate partial discharge (PD), accelerating insulation degradation. In this study, partial discharge experiments were conducted at 50 °C and 80 kV to investigate the behavior of internal semi-conductive protrusion defects in insulation, following methodologies aligned with relevant industry standards IEC 60270 for partial discharge measurements. This voltage condition is obtained from the previous pre-test using the same model, and can ensure that the cable can generate partial discharge under the conditions of 50°C and 80kV, but there will be no rapid deterioration of the cable leading to breakdown, which meets the needs of this experiment. The discharge process is divided into stages, and the relationship between discharge frequency, quantity, and cumulative discharge is explored. The results reveal a clear increase in discharge activity, especially in the fourth stage, which corresponds to the accelerated development of the discharge channel and impending insulation breakdown. These findings provide valuable insights into the defect's progression and highlight the risks of protrusion defects in HVDC cable insulation. This research contributes to the understanding of insulation degradation mechanisms and offers important data for improving the design, manufacturing, and maintenance of HVDC cables.