Related Experiment Video
Updated: Sep 17, 2025

A Photonic System for Generating Unconditional Polarization-Entangled Photons Based on Multiple Quantum Interference
Published on: September 5, 2019
A compact MIMO antenna with high gain and dual circular polarization using a T divider for WLAN applications
Dat Tran-Huy1, Nguyen Tran-Viet-Duc2, Hung Tran3
1Faculty of Electrical and Electronic Engineering, PHENIKAA University, Hanoi, 12116, Vietnam. dat.tranhuy@phenikaa-uni.edu.vn.
Abstract:
This paper presents a circularly polarized (CP) multiple-input multiple-output (MIMO) antenna with compact size and high-gain features for wireless local area network (WLAN) applications. The proposed approach employs two compact dual-CP antennas and T-junction power dividers to design 2-port MIMO antenna. The use of T-junction divider can excite both radiators simultaneously, resulting in high gain operation. For validation, an antenna prototype with overall dimensions of 1.06 λ × 0.65 λ × 0.03 λ at 2.45 GHz is fabricated and measured. The measured operating bandwidth is from 2.43 to 2.485 GHz, in which the matching is less than [Formula: see text] dB, the isolation is higher than 10 dB, and the axial ration is smaller than 3 dB. Additionally, the antenna also performs high gain radiation of about 8.0 dBi and good MIMO diversity performance in terms of envelop correlation coefficient, diversity gain, and so on. In comparison with the related works, the proposed antenna is beneficial in terms of CP radiation and overall dimensions with less number of required radiating elements, while achieving comparable performance.
More Related Videos
06:43Effective Analysis of Human Exposure Conditions with Body-worn Dosimeters in the 2.4 GHz Band
Published on: May 2, 2018
10:35Using Microwave and Macroscopic Samples of Dielectric Solids to Study the Photonic Properties of Disordered Photonic Bandgap Materials
Published on: September 26, 2014
Related Concept Videos
Mesh Analysis for AC Circuits
The process of harmonizing these impedances begins with a clear understanding of the input and output signals. Once these signals are known, the...
Design Example: Capacitance Multiplier Circuit
The circuit illustrated in Figure 1 below incorporates two op-amps, with the first operating as a voltage follower and the second acting as an inverting amplifier.
The Antenna Complex
Clipper Circuit
The operation of a clipper circuit can be exemplified by analyzing a dual-clipper configuration setup that integrates two ideal diodes, each paired with a biasing...
Maximum Power Transfer
By substituting the entire circuit with...