Related Experiment Video
Updated: Sep 17, 2025

Controllable Nucleation of Cavitation from Plasmonic Gold Nanoparticles for Enhancing High Intensity Focused Ultrasound Applications
Published on: October 5, 2018
Investigation of inertial cavitation threshold and corresponding thermal and mechanical effects using multi-frequency
Tatiana Filonets1, Maxim Solovchuk2, Chi-Fang Chen3
1Institute of Biomedical Engineering and Nanomedicine, National Health Research Institutes, No. 35, Keyan Road, Zhunan 35053, Taiwan, ROC.
Abstract:
This study numerically investigates the inertial cavitation threshold and the corresponding thermal and mechanical effects under multi-frequency (dual- and triple-frequency) ultrasonic signals. The Gilmore model, coupled with linear viscoelastic models, is used to simulate the bubble dynamics in different media. The inertial cavitation threshold is calculated for different initial bubble radii and various multi-frequency combinations, using two criteria: one based on the bubble radius expansion and the other based on the bubble collapse speed. The threshold results are analyzed, and the optimal frequencies are identified that yield the lowest possible threshold pressure across all studied initial bubble radii (the optimal threshold pressure). The optimal dual-frequency signal provides lower threshold pressures than a single-frequency signal, and the optimal triple-frequency signal further reduces the threshold pressure. Thresholds for the bubble collapse speed criterion are higher than for the radius criterion. Besides thresholds, power deposition (viscous and radiation power) and mechanical damage (strain-related damage) caused by cavitation are numerically investigated. For the bubble collapse speed criteria, the power values increases very rapidly (by about four orders of magnitude) when acoustic pressure is approximately equal to the estimated threshold pressure. For the radius criteria, a gradual increase of power deposition values is observed. The computation of strain is used to estimate a theoretical damage radius caused by tissue deformation during cavitation. Using the optimal frequencies for the bubble collapse speed criterion can lead to a significant enlargement of the strain-related damaged region compared to the radius criterion, with the enlargement factor reaching 20-30 times. Moreover, the damaged area significantly increases with the optimal triple-frequency signals compared to the optimal dual-frequency signals. The results presented in this study can be useful for further research on inertial cavitation and its effects in different media, as well as for focused ultrasound cancer treatments.
Related Concept Videos
Deriving the Speed of Sound in a Liquid
The speed of sound in fluids can be derived by considering a mechanical wave...
Standing Waves in a Cavity
Speed of Sound in Solids and Liquids
Shock Waves
When the source's speed approaches the speed of sound, constructive interference between successive wavefronts emitted by the source occurs immediately behind it. Initially, scientists believed that this constructive interference would result in such high...

