Related Experiment Video
Updated: Sep 17, 2025

Safety Precautions and Operating Procedures in an ABSL-4 Laboratory: 2. General Practices
Published on: October 3, 2016
Evaluation of Safety of Disposable Saliva Ejectors after Autoclaving Sterilisation
Purpose:
To identify the bacteria and proteins that remain after cleaning and sterilisation of SEs used in dental practices, and to investigate potential problems when reusing SEs.
Materials And Methods:
In total, 105 SEs used on study participants were collected. The collected SEs were immediately immersed in the disinfectant solution and then washed with tap water and a cleaning brush. The SEs were dried, placed in sterile pouches, and sterilised in an autoclave before being used in the experiment. To detect residual bacteria, SE samples were cultured in brain heart infusion (BHI) broth for 10 days, followed by re-culturing on blood agar and BHI agar. Bacterial identification was performed using bacterial colonies. To identify residual proteins, SE samples were stained with phloxine B, and the stained sites and area were analysed.
Results:
Residual bacteria were found in one (1.64%) of 61 sterilised SEs. The cultured colonies were identified as Staphylococcus warneri. Residual proteins were observed on the tips of 36 (81.8%) of the 44 SE samples, and on the bodies of all samples (100%). The average stained area of the residual proteins on the SE bodies was 1.78% (standard deviation, 3.1%).
Conclusion:
The presence of bacteria and proteins in sterilised SEs indicates that their reuse can cause cross-contamination. This study is the first attempt to provide experimental evidence of the problems with reuse of SEs.
Related Concept Videos
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...

