Related Experiment Video
Updated: Sep 16, 2025

Nitrogen Compound Characterization in Fuels by Multidimensional Gas Chromatography
Published on: May 15, 2020
Greener analytical methods for fragrance quality control: Replacing helium with hydrogen and nitrogen in gas
Gaia Bechis1, Alessia Arena2, Carlo Bicchi1
1Department of Drug Science and Technology, University of Turin, 10125, Turin, Italy.
Abstract:
This study aimed to develop and evaluate alternative analytical methods for fragrance analysis by replacing conventional helium with greener carrier gases in gas chromatography-mass spectrometry/flame ionization detection (GC-MS/FID). Using both conventional (0.25 mm dc) and reduced internal diameter (0.18 mm dc) columns, hydrogen and nitrogen were evaluated for the first time against the reference helium method for the analysis of complex fragrances. The method translation involved the optimization of flow rates and temperature programs to achieve faster analysis times. Hydrogen enabled a significant reduction in analysis time and improved signal-to-noise (S/N) ratios due to narrower peak widths, whereas nitrogen, although safer and inert, resulted in lower sensitivity and altered mass spectral fragmentation that necessitated dedicated spectral libraries. Quantitative and qualitative performances were compared by assessing resolution, limits of detection and quantification, spectral similarity, absolute and relative quantification. Furthermore, a comprehensive evaluation based on the Red-Green-Blue model integrated analytical performance, environmental impact, and practical efficiency. The results demonstrated that the hydrogen-based methods, in particular when using gas generators, achieved a more balanced performance with reduced energy consumption and lower environmental footprint, maintaining robust analytical capabilities. Overall, the proposed methods provide a viable and greener alternative for routine quality control in the fragrance industry and supports the development of sustainable and regulatory-compliant analytical methods in line with the Green Analytical Chemistry principles.
More Related Videos
Related Concept Videos
Gas Chromatography: Types of Detectors-II
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall....
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Mass Spectrometry: Complex Analysis
GC–MS is a powerful hyphenated method commonly used in forensics and environmental...
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a...

