Graphene Oxide/MXene Nanocomposite Cross-Linked by Urea as a Sorbent for Thin-Film Microextraction of Fipronil and
Seyedeh Bentolhoda Hosseinian1, Milad Ghani1, Jahan Bakhsh Raoof2
1Department of Analytical Chemistry, Faculty of Chemistry, University of Mazandaran, Babolsar, Iran.
Abstract:
Herein, a nanocomposite containing graphene oxide/MXene was prepared and cross-linked with urea as a novel sorbent. The sorbent was coated on the surface of a cellulosic paper to prepare a thin film for the thin-film microextraction process. The developed method was applied for the extraction of fipronil and permethrin (as model analytes), followed by separation and quantification using high-performance liquid chromatography-ultraviolet detection. Under optimal condition, the linear dynamic range of the method varied from 0.20 to 100.00 µg L-1, with a correlation coefficient (r2) higher than 0.9967. The limits of detection and limits of quantification were determined to be in the ranges of 0.05-0.06 µg L-1 and 0.17-0.19 µg L-1, respectively. The relative standard deviations (%RSDs) ranged from 2.7% to 5.7%. Additionally, the enrichment factors (EFs) of the studied analytes were 72.00 and 83.00. To evaluate the applicability of the method for real sample analysis, cucumber, tomato, watermelon, and pear were selected and analyzed. The obtained recovery results (90%-116%) confirmed that the method is suitable for accurate analysis.
More Related Videos
11:18Manufacturing of a Nafion-coated, Reduced Graphene Oxide/Polyaniline Chemiresistive Sensor to Monitor pH in Real-time During Microbial Fermentation
Published on: January 7, 2019
07:51Development and Functionalization of Electrolyte-Gated Graphene Field-Effect Transistor for Biomarker Detection
Published on: February 1, 2022
