Related Experiment Video
Updated: Sep 16, 2025

Coupling Carbon Capture from a Power Plant with Semi-automated Open Raceway Ponds for Microalgae Cultivation
Published on: August 14, 2020
Dynamic modeling and optimal control schemes for an offshore-wind powered direct air capture system with energy
Muhammad Faisal Shehzad1, Haris Ishaq2, Curran Crawfrod2
1Institute for Integrated Energy Systems (IESVic), University of Victoria, BC V8P 5C2, Canada.
Abstract:
Direct air capture of CO2 is a technically feasible solution for reducing atmospheric CO2 concentrations at-scale, building on decades of global research. However, powering such systems with CO2-intensive fossil fuels results in reduced net CO2 capture. This paper proposes an offshore-wind energy powered atmospheric CO2 capture system. A key challenge is the variable nature of renewable wind-energy to meet direct air capture (DAC) system power requirements. One solution to mitigate this challenge is to integrate the wind-CO2 capture system with advanced Energy Storage Systems (ESS). Previous research in this direction has been carried out, however the optimal ESS is still an open question due to the limitations and constraints of each ESS technology. The constraints include concerns over degradation, ESS response times, and overall costs. This paper proposes an advanced energy management strategy (EMS) within the CO2 capture system to address the outlined problems. It presents a dynamic model for offshore-wind direct air capture of CO2 system coupled with a battery-based energy storage system with the objective of maximizing CO2 removal from air while fulfilling the overall system operational constraints and dynamics. More specifically, the proposed model investigates the flexibility of the CO2 capture system with respect to wind power supply in different seasons. The DAC models proposed in this research consists of a three state automaton, namely: OFF, Adsoprtion, and Desorption which handle the three operational states of the proposed CO2 capture system. In order to maximally utilize wind power availability, each operational state of the proposed model is considered as a separate load and dispatched separately. The proposed approach is then compared and analyzed by scheduling the system as a whole. Numerical results illustrate the feasibility of powering CO2 capture system via variable wind power.
Related Concept Videos
Wind Turbine Machine Models
Induction machines interact through the rotating magnetic field generated by the stator and the rotor. The key parameter is slip, which is the difference between synchronous speed and rotor speed relative to synchronous speed. Slip is...
Turbine-Governor Control
Conservation of Energy in Control Volume
For steady flow systems, the time derivative of the stored energy becomes zero since there is no energy accumulation within the control volume. This simplifies the energy equation to:
Energy Considerations in Open Channel Flow
Generator Voltage Control
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...

