Study of the Friction Contact of HIPIMS Magnetron-Sputtered TiB₂ Against Aluminium at Temperatures up to 300 °C

In this study, we investigated the frictional properties of TiB₂ films produced by high-power impulse magnetron sputtering and compared them with those of TiN- and CrN-sputtered coatings also made using high-power pulsed discharges. The films were characterised by scanning electron microscopy, Electron Probe Micro-Analysis, nanoindentation and friction tests. Sliding friction analyses were performed against aluminium surfaces at different temperatures, ranging from room temperature to 300 °C. The TiB₂ coatings exhibited hardness values of about 39 GPa, regardless of the bias potential used between -50 V and -100 V, a low modulus of around 300 GPa and a dense compact columnar microstructure with grain sizes between 51 and 68 nm in diameter. The friction behaviour on aluminium produced the transfer of this element to the films, at rates that depended on the test temperature. The TiN and CrN coatings exhibited low-medium adhesion to aluminium at room temperature and severe transfer during the friction tests at 150 °C. In the case of the TiB₂ films, the adhesion of aluminium during friction tests was low for temperatures up to 175 °C. In fact, a clear transition of the mild-to-severe adhesion of aluminium on TiB₂ was observed in the temperature range of 175 °C to 200 °C for the testing conditions evaluated in this study, which was concomitant with the evolution observed for the friction coefficients.