Development of Constitutive Relationship for Thermomechanical Processing of FeCrAl Alloy to Predict Hot Deformation...

Numerical simulation is a vital tool in the development of FeCrAl alloy cladding tubes, with its reliability closely tied to the predictive accuracy of the thermal deformation constitutive model used. In this study, hot compression tests on 0Cr23Al5 alloy were conducted using a Gleeble-3800 thermal compression testing machine (Dynamic Systems Inc., located in Albany, NY, USA), across a temperature range of 850-1050 °C and a strain rate range of 0.1-10 s^-1. Based on the data obtained, both the Arrhenius constitutive model and the artificial neural network (ANN) model were developed. The ANN model demonstrated significantly superior predictive accuracy, with an average absolute relative error (AARE) of only 0.70% and a root mean square error (RMSE) of 1.99 MPa, compared to the Arrhenius model (AARE of 4.30% and RMSE of 14.47 MPa). Further validation via the VUHARD user subroutine in ABAQUS revealed that the ANN model has good applicability and reliability in numerical simulations, with its predicted flow stress showing high consistency with the experimental data. The ANN model developed in this study can effectively predict the rheological stress of FeCrAl alloys during hot deformation. It provides methodological support for high-fidelity constitutive modeling of the flow stress of FeCrAl alloys and offers a reliable constitutive model for simulating the thermomechanical load response behavior of FeCrAl alloys.