Microscopic Mechanism Study on Gas-Crude-Oil Interactions During the CO₂ Flooding Process in Water-Bearing Reservoirs

The impact of water on CO₂ sequestration and enhanced oil recovery processes is significant. In this study, a CO₂-water-film-crude-oil-rock molecular system was established. Then, the influence of water-film thickness on the dissolution and dispersion of CO₂ and crude oil under different temperature and pressure scenarios was examined through molecular dynamics simulations. The results indicate that water films hinder CO₂ diffusion into the oil, reducing its ability to lower oil density. When the thickness of the water film increases from 0 nm to 3 nm, the oil density increases by 86.9%, and the average diffusion coefficient of oil decreases by 72.30%. Increasing the temperature enhances CO₂-oil interactions, promoting CO₂ and water diffusion into oil, thereby reducing oil density. Under conditions of a 2 nm water film and 10 MPa pressure, increasing the temperature from 100 °C to 300 °C results in a decrease of approximately 32.1% in the oil density. Pressure also promotes oil and water-film density reduction, but its effect is less significant compared to temperature. These results elucidate the function of the water film in CO₂-EOR processes and its impact on CO₂ dissolution and diffusion in water-bearing reservoirs.