Related Experiment Video
Updated: Sep 14, 2025

Production and Analysis of Sporosarcina pasteurii Biocement Bricks Using Custom 3D-Printed Molds for Unconfined Compression Tests
Published on: March 7, 2025
Shear strength, compressibility, and consolidation behaviour of expansive clay soil stabilized with lime and silica
Sultan Almuaythir1, Muhammad Syamsul Imran Zaini2, Muzamir Hasan2
1Department of Civil Engineering, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University, 11942, Al-Kharj, Saudi Arabia. s.alhomair@psau.edu.sa.
Abstract:
Expansive clay soils cause structural failures in construction due to volume changes with moisture, but hydrated lime effectively stabilizes them by improving shear strength and reducing plasticity. To address environmental concerns with traditional stabilizers like cement, silica fume, a byproduct of the silicon industry, is now being used as a supplementary additive to enhance stabilization. In this study, the combined effects of hydrated lime and silica fume addition on the shear strength and consolidation behaviour of expansive clay soils are presented. An experimental programme was performed in the laboratory using different ratios of lime and silica fume to determine changes in soil properties. Experimental results indicate that the inclusion of silica fume and lime leads to a 35% increase in shear strength and a 28% reduction in compressibility compared to untreated soil. Moreover, the peak deviatoric stress increased from 540.55 kPa in untreated soil to 624.95 kPa in soil stabilized with 9% lime and 9% silica fume. The results clearly demonstrated that the union of these two additives improves shear strength and consolidation characteristics to stabilize expansive clays which is eco-friendlier and more promising solution. The insights obtained from this research will help us to develop soil stabilization techniques for better in-situ soil performances and hence, sustainable construction.
Related Concept Videos
Strength of Cement
For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...
Soundness of Cement
Mortar Properties
Relation Between Tensile Strength and Compressive Strength of Concrete
Bonding and Strength of Aggregate
Behavior of Concrete Under Compressive Load
As the concrete specimen fractures under...

