Related Experiment Video
Updated: Sep 13, 2025

Vegetated Treatment Systems for Removing Contaminants Associated with Surface Water Toxicity in Agriculture and Urban Runoff
Published on: May 15, 2017
Hydrologic performance assessment of low impact development facilities based on monitoring data and SWMM modeling in
Yu-Jia Chiu1,2, Lo-Chen Chang3, Yu-Te Lin3
1Department of Harbor and River Engineering, National Taiwan Ocean University, No.2, Beining Rd., Zhongzheng Dist, Keelung City, 202301, Taiwan R.O.C.. yjchiu@mail.ntou.edu.tw.
Abstract:
Traditional urban stormwater management systems are increasingly strained by expanding impervious ground cover and intense precipitation associated with climate change. Low-impact Development (LID) has emerged as a vital strategy to mitigate these impacts. This study assessed Taiwan's first large-scale integrated LID installation-the Taoyuan Water Recycling Center, which incorporates bioretention cells, permeable pavements, and green roofs. Simulations performed using the Storm Water Management Model (SWMM) calibrated using field data collected in 2021-2024 demonstrated that these LID facilities reduced runoff volume by as much as 88%, with peak flow reductions reaching 90%. Under short-duration rainfall conditions, LID also reduced the risk of urban flooding by delaying the onset of peak flows. Analysis of six sub-catchments subjected to 24 synthetic storm scenarios revealed facility layout, storage capacity, and contributing drainage area as the principal determinants of LID performance. These findings underscore the need to scale up LID infrastructure-by increasing storage depth as well as spatial coverage-when seeking to enhance the resilience of urban centers to extreme rainfall.
Related Concept Videos
Design Example: Analyzing Capacity Contours for Flood Risk Assessment
Typical Model Studies
Design Example: Creating a Hydraulic Model of a Dam Spillway
Conservation of Mass in Moving, Nondeforming Control Volume
In the context of a detention basin, the conservation of mass states that the total mass of water entering the basin must equal the mass leaving the basin plus any accumulation of...
Rapidly Varying Flow
Design Example: Design of an Irrigation Channel

